Gulley Performance Center

2604 Fort Henry Dr. Kingsport, TN. 37664
Call for information 423-247-2271


Automotive Punch & Flare Sets


Product Description


Just drill a pilot hole for the draw bolt, then apply the tool and tighten the bolt with a box end wrench or rachet for a smooth, flared hole in one easy step. You can use the use punch and die without the female flare ring to punch a straight hole only.


Features


Automotive Punch and Flare Tools punch holes the diameter of the punch and as the flare is formed the hole is enlarged about 1/8". The leg formed is approximately 1/4" tall. Punch to die clearance is .012".


Maximum Thickness Capacity:


  • Mild Steel 16 ga. ( .062 )
  • Aluminum 14 ga. ( .062 )
  • Stainless Steel 19 ga. ( .040 )

Product Name
Part#
Price

1" P & F Tool Set
1300-013
$120.00

1-1/4" P & F Tool Set
1300-014
$120.00

1-1/2" P & F Tool Set
1300-015
$135.00

1-3/4" P & F Tool Set
1300-016
$135.00

2" P & F Tool Set
1300-017
$145.00

2-1/2" P & F Tool Set
1300-018
$145.00

2-5/8" Punch & Flare Tool
1300-019
$135.00

3" P & F Tool Set
1300-020
$160.00

P & F Set, 1 - 2-1/2"
1300-402
$720.00

P & F Set, 1 - 3"
1300-403
$860.00


Automotive Punch & Flare Sets
Automotive Punch & Flare Dimensions

Product Downloads


Punching Mild Steel - Chart