Gulley Performance Center

2604 Fort Henry Dr. Kingsport, TN. 37664
Call for information 423-247-2271


Dollies


Martin Dolly Blocks are drop forged from high carbon steel, heat treated, and polished to a very smooth finish. Dollies are one of the basic hand tools for body and fender repair. Many shapes, weights, and crowns are available for bumping, shrinking, peening, dinging, or finishing auto body work. Dollies are made in Fort Worth, Texas.



LIGHT WEIGHT TOE DOLLY

Designed for flat surfaces. All the features of a toe dolly.

Sizes 434″ 214″ 1116″.

Weight 1.8 lbs.

1057 $52.00

image of dinging hammer


TOE DOLLY

Thinness and length provide easy accessibility to narrow pockets. Large, flat face is frequently used in shrinking and dinging flat panels. The flat sides furnish a convenient anvil for repairing flanges.

Sizes 434″ 238″ 118″.

Weight 3.0 lbs.

1058 $52.00

image of dinging hammer


SHRINKING DOLLY (SERRATED)

Shaped like a toe dolly but has one face covered with raised serrations for shrinking metal stretched by dents.

Weight 3.4 lbs.

1058S $52.00

image of dinging hammer


HEEL DOLLY

Design makes it possible to reach easily into sharp corners and wide radii. These features are exclusive to the Heel Dolly and continue its high demand.

Sizes 314″ 212″ 1716″.

Weight 2.7 lbs.

1059 $44.00

image of dinging hammer


GENERAL PURPOSE DOLLY

Provides convenient and comfortable hand hold during heaviest blows. Weight, balance and several differently crowned working faces, together with two beading and flange lips, give this dolly broad general use.

Sizes 278″ 238″ 214″.

Weight 3 lbs.

1060 $54.00

image of dinging hammer


UTILITY DOLLY

High-crown dolly with one narrow beading edge. Thick rounded sides are useful in short radii curves. Wide application of uses in high-crown portions of hoods, fenders and body panels.

Sizes 318″ 3″ 158″.

Weight 2.9 lbs.

1061 $48.00

image of dinging hammer


EGG SHAPED DOLLY

This unique shape with high crown design is a very popular shape, with many different curves and angles.

Sizes 158″ 212″ 334″.

Weight 3.1 lbs.

1064 $52.00

image of dinging hammer


LIGHT WEIGHT WEDGE DOLLY

Short, slender general purpose Dolly. Good hand grip. Also used for beads or flanges on fenders. Thin edge is useful for corners and beading. Flat side works under long curve of fender.

Sizes 2764″ 212″ 42764″.

Weight 2.7 lbs.

1065 $37.00

image of dinging hammer


WEDGE DOLLY

Long, slender general purpose dolly. Widely favored by many body repair men for all-around use. The long, thin lip is very useful in working behind reinforcements.

Sizes 534″ 238″ 2316″.

Weight 4 lbs.

1067 $54.00

image of dinging hammer


LOW CROWN DOLLY

Specially designed for use on low-crown panels where medium and high-crown dollies would stretch the metal. Angle between the sides and large face is less than 90 degree, which permits this dolly to reach into the corner of a flanged edge.

Size 378″ 234″ 158″.

Weight 3.3 lbs.

1068 $52.00

image of dinging hammer


"CHAMPION" HEAVYWEIGHT DOLLY

Heavy duty, general purpose fender dolly. A necessity on heavy gauge fenders which resist the blows of lighter dollies. Brings out the toughest damage. Seats comfortably in the hand and protects fingers from a swinging blow.

Sizes 338″ 338″ 21116″.

Weight 4.6 lbs.

1070 $73.00

image of dinging hammer