Gulley Performance Center

2604 Fort Henry Dr. Kingsport, TN. 37664
Call for information 423-247-2271


Multitool


Multitool Bench Grinder Belt & Disc Attachments
2 x 36"

"The Ultimate Finishing Tool"

The Multitool belt grinding attachment for your bench grinder is a must-have tool for any fabricator! This versatile tool removes material up to 5 times faster than with the equivalent grit grinding wheel. Belts change in seconds from grinding, to sand deburr or polish. Quality construction is backed by a 3-year warranty.

image of mutlitool 36" attachment

2x36" attachment


A variety of belts and discs are available for any project. Multitool fits most popular brands of grinders with screw-on type wheel guards with no special adapter required. The Multitool attachment requires at least 1/3 HP ( 1/2 HP recommended ). Shaft size must be 5/8" diameter. With a standard 3,450 RPM grinder belt speed is approximately 5,400 surface feet per minute. The fitting kit contains a universal adaptor with radial slots to suit grinder's wheel guard mounting holes, and easy to follow instructions. Multitool will not fit a grinder with heavy cast wheel guards if the guards are used to retain the spindle bearings.


smaller image of multitool 32 inch attachement

MT362 2x36" Attachment includes 1 80 grit belt
5,400 SFPM at 3,450 RPM

$219.95

 

Belts availble 40 through 600 grit.

 



Multitool Bench Grinder Belt & Disc Attachments
2 x 48"

"The Ultimate Finishing Tool"

The Multitool belt grinding attachment for your bench grinder is a must-have tool for any fabricator! This versatile tool removes material up to 5 times faster than with the equivalent grit grinding wheel. Belts change in seconds from grinding, to sand deburr or polish. Quality construction is backed by a 3-year warranty.


image of multitool 48 inch

2x48" attachment


A variety of belts and discs are available for any project. Multitool fits most popular brands of grinders with screw-on type wheel guards with no special adapter required. The Multitool attachment requires at least 1/3 HP ( 1/2 HP recommended ). Shaft size must be 5/8" diameter. With a standard 3,450 RPM grinder belt speed is approximately 5,400 surface feet per minute. The fitting kit contains a universal adaptor with radial slots to suit grinder's wheel guard mounting holes, and easy to follow instructions. Multitool will not fit a grinder with heavy cast wheel guards if the guards are used to retain the spindle bearings.


small image of multitool 48 inch grinder attachment

MT482, Multitool 2x48" Grinder Attachment
includes 1 80 grit belt
5,400 SFPM at 3,450 RPM. Miter table sold separately.

$289.95

Belts availble 40 through 600 grit.