Gulley Performance Center

2604 Fort Henry Dr. Kingsport, TN. 37664
Call for information 423-247-2271


Mittler Bros. Ultimate Notcher Variable Speed

75 to 250 RPM Adjustable Cutter Speed Control

1-1/2 HP AC Motor 15 Amp 1 Phase 50 / 60 Cycle

Maximum Diameter: 2" Dia. / Std. Vise 2-1/2" Dia. / Upgraded Vise

The environmentally friendly notching operation is made without any cutting fluids (no mess), no dust or high pitch noise is generated as in other methods, chips are collected under cutter, and cutter life is usually 9 months to one year - based on 300 cuts per day, 5 days per week.

The Ultimate Tubing Notcher was designed especially for the tube fabrication professional who demands accuracy and productivity to the highest degree. Nothing else even comes close!

The Ultimate Tubing Notcher was designed after years of frustration in using every other possible tool. No other tool is faster or more accurate! The Ultimate offers the best of both worlds: the highest degree of quality with the minimum consumption of time. Operation is simple; just clamp tubing in the calibrated swivel vise that allows for accurate and repeatable positioning at any angle. A compound feed table advances tubing into the milling cutter, producing a perfect notch and a perfect fit - every time.

Ideal for anyone notching small diameter thin walled tubing or large diameter heavy wall tubing. [ 1/2" to 2-3/8" OD with .032" to .250" wall ]

Combines all the great features you've come to expect of our Ultimate Notcher with the added benefit of a variable speed control. The variable speed control combined with high helix cutters will virtually eliminate the "HOOKING."

Who can benefit from variable speeds?

Race car shops specializing in thin wall tube

Marine handrail shops

Fencing industry

Heavy fabrication shops

Add this extraordinary tool to your shop to make your work easier, faster, more professional and more profitable

Lifetime sealed Bearings

V-block vise design means minimum set-up time

Protective shield

1-1/2 HP Standard

End mill design allows fast metal remover

115 - volt operation

Rugged construction 385 lbs.

Notches any size tube from 1/2" to 2" in diameter. ( 1/2" & 5/8" tube require vise jaw adapter )

New heavy duty swivel base - calibrated swivel vise allows any angle setting. Does not clog with chips!

Made in the USA


picture of variable speed unit

This Machine Ships By Truck Freight Only

 Ultimate Tubing Notcher 1-1/2 HP Capacity 3/4" to 2" tubing.   400-VS   $5,250.00 
 Ultimate Tubing Notcher 1-1/2 HP Same as above with adjustable jaw height vise for offset notching (Max capcity 3/4" to 2" tubing).   400-VSADJ   $5,550.00 
 UPGRADED Ultimate Tubing Notcher 1-1/2 HP Includes larger V-block vise jaws ( Max capacity of 2 1/2" tubing or 2" pipe.) ( Recommended for pipe notching! )   400-VSU   $5,550.00 
 UPGRADED Ultimate Tubing Notcher 1-1/2 HP Same as above with adjustable jaw height vise for offset notching ( Max capacity of 2 1/2" tubing or 2" pipe.) ( Recommended for pipe notching )   400-VSUADJ   $5,850.00 
 Optional stand rugged wheeled fabricated stand provides plenty of safe storage of spare cutters.   400-A400     $395.00 

OPTIONAL CUTTERS

High helix cutters are recommended for thin walled tubing & are American made.

Call 423-247-2271 for sizes and prices